русский
1. Preparation and inspection before operation
Equipment inspection: Perform a visual inspection of the electric Electrical Cable Winch. Pay attention to whether the housing, drum, bracket and other parts of the winch are obviously deformed, cracked or damaged. These damages may affect the structural strength and stability of the winch, thereby increasing the risk of operation. The cable is one of the core components of the electric cable winch, so it is crucial to inspect it carefully. Check whether the cable is intact and there are no worn, broken or exposed wires. Pay special attention to the end connection parts of the cable to ensure that they are firm and reliable, without looseness or falling off. If the cable is found to be damaged or aging, it should be replaced with a new one immediately. The drum is a component for cable winding and release, and its state directly affects the use effect and safety of the cable. Check whether the surface of the drum is flat and smooth, without bumps or burrs. The rotation of the drum should be flexible and smooth, without jamming or abnormal noise. If the drum is found to be damaged or abnormal, it should be repaired or replaced in time.
Power supply check: Confirm that the power supply connection is stable and the voltage meets the equipment requirements to avoid equipment damage or safety hazards caused by excessively high or low voltage.
Grounding check: Check whether the equipment is well grounded and whether the grounding resistance meets the requirements to prevent electric shock accidents.
Environmental check: Ensure that the operating environment is dry, free of flammable and explosive items, and away from fire sources to prevent fire accidents.
2. Safety matters during operation
Standard operation: Strictly follow the equipment manual and operating procedures, and do not change or omit the operating steps at will.
Avoid overload: During operation, pay attention to avoid overloading the cable winch to avoid damage to the equipment or cause safety accidents.
Cable management: The cable should be kept clean and avoid winding, knotting or over-stretching. During the traction process, pay attention to the tension of the cable to avoid sudden loosening or breaking.
Personnel safety: Operators should wear labor protection equipment, such as safety helmets, gloves, work clothes, etc. During operation, stay focused and avoid distraction or fatigue operation.
Avoid electric shock: During operation, avoid touching exposed wires or cables to prevent electric shock. If the equipment has leakage or short circuit, the power supply should be cut off immediately and professionals should be notified for repair.
Prohibition of illegal operation: It is prohibited to clean, maintain or adjust the equipment while it is running. If such work is required, the equipment should be shut down and the power supply should be cut off first.
Emergency stop: During operation, if the equipment is found to be abnormal or dangerous, the emergency stop button should be pressed immediately, the power supply should be cut off and relevant personnel should be notified for processing.
III. Maintenance and care after operation
Cleaning work: After the operation is completed, the electrical cable winch should be cleaned to remove dust, oil and other debris on the surface.
Check the cable: Check whether the cable is worn, broken or deformed, and replace it in time if necessary.
Lubrication and maintenance: Lubricate and maintain the equipment regularly to keep the equipment running normally.
Regular maintenance: Regularly conduct comprehensive inspection and maintenance of the electrical cable winch, including inspection and maintenance of motors, transmission systems, drums and other components.
Safety is always the primary consideration when operating the electrical cable winch. Through strict pre-operation preparation, standardized operation process and post-operation maintenance and care, safety risks can be minimized to ensure the normal operation of equipment and the safety of personnel. At the same time, improving the safety awareness and skill level of operators is also the key to ensuring safety.
